Semi-Gloss Stone Sealer

• Enhances color and texture with a soft semi-gloss finish
• Protects stone and concrete from oil and water-based stains
• Water-based sealer for indoor & outdoor use

MORE® Semi-Gloss Stone Sealer enhances the natural color and character of stone and concrete while providing durable stain protection. This water-based formula creates a subtle, semi-gloss “wet look” finish that enriches the surface without leaving a plastic or sticky coating.

Why It’s Different

• Enhancing Protection: Seals while adding a soft sheen that boosts visual appeal.
• Beautifies + Seals in One Step: Enhances color and texture while protecting against stains.
• Water-Based & Low Odor: Safer for indoor use and easy to apply.
• Long-Lasting Barrier: Helps repel spills, moisture, and grime.
• No Surface Film: Leaves a natural-looking enhancement, not a thick coating.

How to Use

1. Ensure the surface is clean and dry.
2. Apply evenly using a brush or roller.
3. Allow to absorb for 15 minutes.
4. Remove excess sealer that has not absorbed.
5. Allow to cure: light foot traffic after 12 hours; full cure in 24–48 hours.

Recommended For

• Natural stone (honed or unpolished)
• Granite
• Marble
• Slate
• Limestone
• Travertine
• Sandstone
• Concrete
• Saltillo and clay-based tile

Send the next one when ready.